Homepage/ Production / Laboratory
Laboratory

 

 From the moment Hammaddenin enters the factory firstly, quality control application is started in accordance with HACCEP criteria.

 Raw material trucks first enter sterile pools to prevent any contamination.

 When raw material arrives at the canteen, sampling rods go into operation 10 times without touching and sampling takes place automatically.

 The sample is sent to the quality control laboratory to start the analysis.

 If the incoming raw material meets the analysis criteria, it is accepted for production and sent to unloading pools.

 The raw material is discharged into the discharge ponds and taken to the production depots after passing through the magnet, filter and cleaner, respectively.

 According to the determined ration; Each raw material is weighed at the weighing scale.

 The weighed raw material is crushed by passing through the mill.

 It is poured into the piano.

 Raw materials passing through the mixer are sampled for homogeneity test and sent to the laboratory for homogeneity test.

 At the end of the homogenity test, the feed is molted by being sent to the molasses.

 If powdery feed is produced, molasses will be sent directly to the warehouse and sampled.

 If the sample is analyzed according to the standards sent to the laboratory, the sample is delivered to the bag.

 If the feed from the molasses is to be made in pellet form, the prese is sent.

 The feed to the prese is made into dough at the appropriate temperature and cutting process is done at the desired size and the cooler is taken.

 Samples are taken from the feed which is kept in the refrigerator for a certain period and sent to the analysis.

 If the results of the analysis are in accordance with the standards, bagging is done and offered for sale.